Makita 4350T Manual de Instruções descarregar pdf (Página 8)

12. Do not touch the blade or the workpiece

immediately after operation; they may be

extremely hot and could burn your skin.

13. Do not operate the tool at no-load unnecessarily.

14. Some material contains chemicals which may be

toxic. Take caution to prevent dust inhalation and

skin contact. Follow material supplier safety data.

15. Always use the correct dust mask/respirator for

the material and application you are working with.

SAVE THESE INSTRUCTIONS.

WARNING:

MISUSE or failure to follow the safety rules stated in

this instruction manual may cause serious personal

injury.

FUNCTIONAL DESCRIPTION

CAUTION:

•Always be sure that the tool is switched off and

unplugged before adjusting or checking function on the

tool.

Selecting the cutting action (Fig. 1)

This tool can be operated with an orbital or a straight line

(up and down) cutting action. The orbital cutting action

thrusts the blade forward on the cutting stroke and greatly

increases cutting speed.

To ch ange th e cu t ting ac t ion , ju s t t u rn t he c utt i ng a cti o n

changing lever to the desired cutting action position. Refer

to the table to select the appropriate cutting action.

006376

Switch action (Fig. 2)

CAUTION:

•Before plugging in the tool, always check to see that

the switch trigger actuates properly and returns to the

“OFF” position when released.

To st a rt t he t ool, s im ply pul l th e sw i tch t ri g ger. Re l eas e

the switch trigger to stop.

For continuous operation, pull the switch trigger and then

push in the lock button.

To st op th e to ol f rom the loc k ed p osi ti on , p ul l t he sw i tch

trigger fully, then release it.

Speed adjusting dial

For 4350CT, 4350FCT (Fig. 3)

The tool speed can be infinitely adjusted between 800 and

2,800 strokes per minute by turning the adjusting dial.

Higher speed is obtained when the dial is turned in the

direction of number 5; lower speed is obtained when it is

turned in the direction of number 1.

Refer to the table to select the proper speed for the

workpiece to be cut. However, the appropriate speed may

differ with the type or thickness of the workpiece. In

general, higher speeds will allow you to cut workpieces

faster but the service life of the blade will be reduced.

006368

CAUTION:

•The speed adjusting dial can be turned only as far as 5

and back to 1. Do not force it past 5 or 1, or the speed

adjusting function may no longer work.

The tools equipped with electronic function are easy to

operate because of the following features.

Constant speed control

Electronic speed control for obtaining constant speed.

Possible to get fine finish, because the rotating speed is

kept constant even under load condition.

Soft start feature

Safety and soft start because of suppressed starting

shock.

Lighting up the lamps

For 4350FCT only

CAUTION:

•Do not look in the light or see the source of light

directly.

To t u rn o n t he l a mp, pu ll t he t r igg e r. R ele a se t h e tr ig ge r to

turn it off.

NOTE:

•Use a dry cloth to wipe the dirt off the lens of lamp. Be

careful not to scratch the lens of lamp, or it may lower

the illumination.

ASSEMBLY

CAUTION:

•Always be sure that the tool is switched off and

unplugged before carrying out any work on the tool.

Installing or removing saw blade

CAUTION:

•Always clean out all chips or foreign matter adhering to

the blade and/or blade holder. Failure to do so may

cause insufficient tightening of the blade, resulting in a

serious personal injury.

Position Cutting action Applications

Straight line

cutting action

For cutting mild steel,

stainless steel and plastics.

For clean cuts in wood and

plywood.

Small orbit

cutting action

For cutting mild steel,

aluminum and hard wood.

Medium orbit

cutting action

For cutting wood and

plywood.

For fast cutting in aluminum

and mild steel.

III

Large orbit

cutting action

For fast cutting in wood and

plywood.

Workpiece to be cut Number on adjusting dial

Wood 4 - 5

Mild steel 3 - 5

Stainless steel 3 - 4

Aluminum 3 - 5

Plastics 1 - 4

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

Comentários a estes Manuais

Sem comentários

Makita 4350T Manual de Instruções Página 8

Comentários a estes Manuais

Manuais e produtos relacionados com Motosserras sem fio Makita 4350T