Makita HR2511 Manual de Instruções

Rotary Hammer Capacities Wood Steel Concrete 30" 13 mm 25 mm (1-311 6") (112") (1") 25 mm (1") MODEL HR2511 Variable Speed

Dust collector Use the dust collector for safe, sanitary overhead operations. Install the bit, then attach the dust collector on the e

Install the center bit. I Center bit Rest the core bit on the concrete and turn the tool on. Once the core bit has cut a shallow groove into the

MA1 NTENANCE CAUTION : Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance. Replacing c

Lubrication This tool requires no hourly or daily lubrication because it has a grease-packed lubrication system. It should be relubricated after eve

ACCESSORIES CAUTION : These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any

oct -08-'91 us 25 mm (1") ROTARY HAMMER Model HR2511 Note: The switch and other part configurations may differ from country to country. 15

oct -08-'91 us MODEL HR2511 'LiM AtD DESCRIPTION 'LiM ,& DESCRIPTION MACHINE *E 2 4 Hex Socket Head Bolt M6x25 lWtth Washer1 4 1

IMPORTANT SAFETY I NSTRU CTI 0 NS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE

14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. 15

VOLTAGE WARNING: Before connecting the tool to a power source (receptacle, outlet, etc.) be sure the voltage supplied is the same as that specified o

ADDITIONAL SAFETY RULES 1. Wear a hard hat (safety helmet), safety glasses and/or face shield. It is also highly recommended that you wear a dust mas

Bit grease Coat the bit shank head beforehand with a small amount (about 0.5- 1 g; 0.02-0.04 oz.) of bit grease. This chuck lubrication assures smoo

Side grip (auxiliary handle) The side grip swings around to either side, allowing easy handling of the tool in any position. Loosen the side grip

Switch action Too speed is increased by increasing pres- sure on the trigger. To start the tool, simply pull the trigger. Release the trigger to sto

Driving in anchor manually The drill bit has a red marking at a point corresponding to the anchor length. So drill to that depth. Use the blo