Makita EVH2000 Manual de Instruções descarregar pdf (Página 14)

(6) Hold the element cover with a left hand to prevent the engine from moving,

settle down to take the stable position.

(7) Pull out slowly the starter handle till a certain resistance is felt. Return the

starter handle backward once from this position, then pull it out with force.

• Never pull the rope to the full.

• Once the start knob is pulled, never release your hand immediately. Hold

the start knob until it returns to its original point.

(8) When the engine starts, open the choke lever.

• Open the choke lever progressively while checking the engine operation.

Be sure to open the choke lever to the full in the end.

• In cold or when the engine is cooled down, never open the choke lever

suddenly. Otherwise, the engine may stop.

(9) Continue warm-up operation for 2 to 3 minutes.

(10) Rotation of the engine speed stabilizes and when from low speed making

at high speed rotation, if reaches the point where it accelerates smoothly,

it is completion of warming-up.

NOZZLE LEVER

CLOSED

SLOW

Throttle lever

I-O switch

O (OFF)

Open

2) When the engine is warm

(1) Place the engine on a at ground.

(2) Press the primary pump several times.

(3) Conrm that the choke lever is open.

(4) Hold the element cover with a left hand to prevent the engine from moving, settle down to take the stable position.

(5) Pull out slowly the starter handle till a certain resistance is felt. Return the starter handle backward once from this position, then pull it out

with force.

(6) When the engine is difcult to start, open the throttle valve by about 1/3.

STOPPING THE ENGINE

1) Turn the nozzle lever to the CLOSE position.

2) Turn the I-O switch to “O” Position.

3) Move the throttle lever to the SLOW position.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 127 128

Comentários a estes Manuais

Sem comentários

Makita EVH2000 Manual de Instruções Página 14

Comentários a estes Manuais

Manuais e produtos relacionados com não Makita EVH2000