Makita HR2810T Manual de Instruções descarregar pdf (Página 4)

ENGLISH (Original instructions)

Explanation of general view

1-1. Switch trigger

2-1. Lamp

3-1. Reversing switch lever

4-1. Quick change chuck for SDS-plus

4-2. Change cover line

4-3. Change cover

5-1. Spindle

5-2. Quick change drill chuck

5-3. Change cover line

5-4. Change cover

6-1. Action mode changing knob

7-1. Action mode changing knob

8-1. Action mode changing knob

9-1. Action mode changing knob

10-1. Grip base

10-2. Side grip

10-3. Teeth

10-4. Protrusion

11-1. Bit shank

11-2. Bit grease

12-1. Bit

12-2. Chuck cover

13-1. Bit

13-2. Chuck cover

14-1. Action mode changing knob

15-1. Action mode changing knob

16-1. Depth gauge

17-1. Dust cup

19-1. Blow-out bulb

21-1. Chuck adapter

21-2. Keyless drill chuck

22-1. Quick change chuck for SDS-plus

22-2. Change cover line

22-3. Change cover

23-1. Spindle

23-2. Quick change drill chuck

23-3. Change cover line

23-4. Change cover

24-1. Sleeve

24-2. Ring

24-3. Quick change drill chuck

SPECIFICATIONS

Model

HR2800 /

HR2810

HR2810T HR2811F HR2811FT

Tungsten-carbide tipped bit 28 mm

Core bit 80 mm

Concrete

Diamond core bit (dry type) 80 mm

Steel 13 mm

Capacities

Wood 32 mm

No load speed (min

-1

) 0 - 1,100

Blows per minute 0 - 4,500

Overall length 314 mm 339 mm 320 mm 345 mm

Net weight 3.4 kg 3.5 kg 3.5 kg 3.6 kg

Safety class /II

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

For Model HR2800

ENE042-1

Intended use

The tool is intended for hammer drilling and drilling in

brick, concrete and stone.

It is also suitable for drilling without impact in wood,

metal, ceramic and plastic.

For Model HR2810, HR2810T, HR2811F, HR2811FT

ENE043-1

Intended use

The tool is intended for hammer drilling and drilling in

brick, concrete and stone as well as for chiselling work.

It is also suitable for drilling without impact in wood,

metal, ceramic and plastic.

ENF002-1

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated in accordance with European

Standard and can, therefore, also be used from sockets

without earth wire.

For Model HR2800

ENG102-3

Noise

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (L

) : 89 dB(A)

Sound power level (L

) : 100 dB(A)

Uncertainty (K) : 3 dB(A)

Wear ear protection

ENG217-2

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745:

Work mode : hammer drilling into concrete

Vibration emission (a

h,HD

) : 20.0 m/s

Uncertainty (K) : 1.5 m/s

1 2 3 4 5 6 7 8 9 ... 59 60

Comentários a estes Manuais

Sem comentários

Makita HR2810T Manual de Instruções Página 4

Comentários a estes Manuais

Manuais e produtos relacionados com Ferramentas elétricas Makita HR2810T