Makita HR2810T Manual de Instruções descarregar pdf (Página 9)

Set the action mode changing knob to the

symbol.

You can drill up to 13 mm diameter in metal and up to 32

mm diameter in wood.

CAUTION:

• Never use "rotation with hammering" when the

quick change drill chuck is installed on the tool.

The quick change drill chuck may be damaged.

Also, the drill chuck will come off when reversing

the tool.

• Pressing excessively on the tool will not speed up

the drilling. In fact, this excessive pressure will only

serve to damage the tip of your bit, decrease the

tool performance and shorten the service life of the

tool.

• There is a tremendous twisting force exerted on

the tool/bit at the time of hole breakthrough. Hold

the tool firmly and exert care when the bit begins to

break through the workpiece.

• A stuck bit can be removed simply by setting the

reversing switch to reverse rotation in order to back

out. However, the tool may back out abruptly if you

do not hold it firmly.

• Always secure small workpieces in a vise or similar

hold-down device.

Diamond core drilling

When performing diamond core drilling operations,

always set the change lever to the

position to use

"rotation only" action.

CAUTION:

• If performing diamond core drilling operations

using "rotation with hammering" action, the

diamond core bit may be damaged.

MAINTENANCE

CAUTION:

• Always be sure that the tool is switched off and

unplugged before attempting to perform inspection

or maintenance.

To maintain product SAFETY and RELIABILITY, repairs,

carbon brush inspection and replacement, any other

maintenance or adjustment should be performed by

Makita Authorized Service Centers, always using Makita

replacement parts.

ACCESSORIES

CAUTION:

• These accessories or attachments are

recommended for use with your Makita tool

specified in this manual. The use of any other

accessories or attachments might present a risk of

injury to persons. Only use accessory or

attachment for its stated purpose.

If you need any assistance for more details regarding

these accessories, ask your local Makita Service Center.

• SDS-Plus Carbide-tipped bits

• Bull point

• Core bit

• Cold chisel

• Diamond core bit

• Scaling chisel

• Grooving chisel

• Drill chuck assembly

• Drill chuck S13

• Chuck adapter

• Chuck key S13

• Bit grease

• Side grip

• Depth gauge

• Blow-out bulb

• Dust cup

• Dust extractor attachment

• Safety goggles

• Plastic carrying case

• Keyless drill chuck

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 59 60

Comentários a estes Manuais

Sem comentários

Makita HR2810T Manual de Instruções Página 9

Comentários a estes Manuais

Manuais e produtos relacionados com Ferramentas elétricas Makita HR2810T